Nitek UTPSYS16

Specifications

Nitek UTPSYS16 16-Channel Video, Power and Data Distribution Unit

This simple to install rack mounted solution contains sixteen channels of passive video and is integrated with a 28VAC power supply The construction is a modular card cage equipped with [4] CHM22 modular cards. The UTPSYS16 is a system which transmits video, power and data through the UTP cable. The cable terminates with a standard RJ45 networking connector. Nitek recommends a maximum cable distance of 750 feet (225 meters) which may be reduced based on camera power requirements. Video, camera power and data will be separated from the cable at the camera end by a VB31AT or VB43ATF video balun. The UTPSYS16 provides power and video detection LEDs for easy troubleshooting. Camera ports are individually fused with a self resetting fuse. The UTPSYS16 and the DVR are ready to communicate in a matter of minutes by simply connecting a standard coaxial cable between the BNC video output connectors of the UTPSYS16 product and the DVR. The systems can also adapt to existing communication and computer network spare pairs or new cable installations. These units provide superior immunity from noise and interference, even when run in common raceways with AC.

Key Features:

• Size: 1.72" (H) x 19.0" (W) x 15.50" (D) (with mounting ears)
• UTP Category: 2 or better
• Impedance: 100 Ohms +/- 20%
• Normal Capacitance: 17pF/ft.
• DC Loop Resistance: 51 Ohms/1,000 ft (max) (51 Ohms/300 meters)
• Wire Spec 26 to 12 AWG Unshielded Twisted Pair (UTP)
• Shipping Weight: 25 lbs
• Enclosure Type: Standard 19 inch rack 1 RU in height
• Humidity Range: 0 to 98%, non-condensing
• Temperature Range: -10 degrees C to +70 degrees C
• Twisted Pair Connection (vertical runs): 16 RJ45 connectors providing balanced low voltage current loop
• Power Requirements: 115/230 VAC, IEC with molded power cord (included)

Reviews