Nitek ER1500C-WS1

Specifications

Nitek ER1500C-WS1 IP & PoE Extender over Coax Receiver, Includes 1x Surge Protector and 1x Weatherproof Enclosure

The EL1500C is a transmitter/receiver set consisting of the ER1500C and the ET1500C. These environmentally hardened products provide 10/100 Ethernet and Power Over Ethernet (PoE) at distances of up to 500m over RG-59 or RG6 coaxial cabling. At the head end, the ER1500C will connect to the LAN switch for data and request IEEE802.af PoE power. For non-PoE switches, power can be injected at the head end with an optional PS48 power supply. At the far end, the coax will terminate at the ET1500C which will provide 10/100 Ethernet connectivity and available power at that distance. For higher power requirements, power can be re-injected at the power port of the ET1500C with an optional PS48. 

Key Features:

• Includes Transmitter and Receiver

•  Allows power injection at transmitter far end
•  Extends 10/100 Mbps Full Duplex Ethernet & PoE up to 500 meters over coax
• Supports any IP network device & 4K cameras
• Supports IEEE802.3at (25.5W) and IEEE802.3af (15.4W)
• Fully transparent to the network, no MAC or IP addressing required
• LED indicators for power, network rate, link status, and PoE output
• The optional power supply can insert PoE power for non-PoE switches
• Short circuit, over current, and over-voltage protection
• Ground loop isolation
• Easy to set up and install
• Limited Lifetime Warranty
• Designed, tested, manufactured, and supported in the U.S.A.
• Includes 1x IPCOAX-1 surge protector and 1x WP1325 weatherproof enclosure

Reviews