Nitek EL1551UP-WS1

Specifications

Nitek EL1551UP-WS1 Etherstretch IP Devices over 2-wire Network Extender- PoE Inserter System, Includes 1x Power Supply, 2x Surge Protectors, and 1x Weatherproof Enclosure

The EL1551U is another part of NITEK's cutting-edge EtherStretch line.  This environmentally hardened solution provides a means to create a 10/100 Ethernet link over single pair Cat3 (or better cabling) for distances up to 300m.  Multiple links can share individual pairs in Cat5/6 or similar cabling.  Shielded and non-twisted cabling will have reduced operating distances.  Larger gauge conductors will improve power transfer. The EL1551U consists of a transmitter unit (adjacent to the camera or other network device), and a receiver unit, for the headend.  The receiver will request power From a PoE switch to power the link, or local power can be provided with an optional PS48 power supply.  In the case of longer runs, or higher power applications, power can be injected at the remote transmitter side as well with an optional PS48 supply, providing full 802.3at power of 25.5W. 

Key Features:

• Includes Transmitter and Receiver
• Optional power supply can insert PoE power at either device
• Extends 10/100 Mbps Full Duplex Ethernet & PoE up to 300m on UTP
• Supports any IP network device & 4K cameras
• Supports IEEE802.3at (25.5W) and IEEE802.3af (15.4W)
• Fully transparent to the network. No MAC or IP addressing required
• Short circuit, over-current, and over-voltage protection
• Ground loop isolation
• Easy to set up and install
• Limited Lifetime Warranty
• Designed, tested, manufactured, and supported in the U.S.A.
• Includes PS48 power supply, 2x IPPWR surge protectors and 2x WP1325 weatherproof enclosures

Reviews